Frequently Asked Questions Answered Here
technical information tab

How to properly adjust my UV lamp.


 

Remove the RCP lamp cover and loosen (DON'T REMOVE) the lamp retaining thumbs screws. Slowly rotate the aluminum tube, while keeping the lamp fully inside the block and monitor the RCP Vlamp values on the setup screen. Wait until the values falls within the 1600-2400 mV and then tighten lamp in place and install covers.

WARNING** DO NOT REMOVE UV LAMP FROM PANEL BLOCK. ALWAYS WEAR UV PROTECTIVE GLASSES  WHEN WORKING WITH UV LAMPS.

 

 

NOTE** Please view figure 78 in section 9.5 in your viewer manual.

 

Please contact Peak Laboratories here or contact a local sales representative for custom applications and further information on our standard applications.

 


                               Contact Us Online





 
CLOSE WINDOW